|
Hmmm! That's essentially what Tony suggested, but it doesn't work for me
with either Word 2003 or 2007. Nothing is pasted into the text space, unless
you actually click the paste button or CTRL+V
Word MVP web site http://word.mvps.org
<>>< ><<> ><<> <>>< ><<> <>>< <>><<>
Jen wrote:
with either Word 2003 or 2007. Nothing is pasted into the text space, unless
you actually click the paste button or CTRL+V
<>>< ><<> ><<> <>>< ><<> <>>< <>><<>
Graham Mayor - Word MVP
My web site www.gmayor.comGraham Mayor - Word MVP
Word MVP web site http://word.mvps.org
<>>< ><<> ><<> <>>< ><<> <>>< <>><<>
Jen wrote:
> I use 2007 Outlook and Word 2003 and Word 2007
> I did play with Options Mail Format to HTML and Rich Text.
>
>
> Sub Send_Extract_As_MailKeepFmt()
> ' send the document in an Outlook Email message - HTML Rich Text
> Format maintained (Brilliant)
> ' 20April2008
> ' 2007 Graham Mayor Tony Jollans Doug Robbins
>
> Dim bStarted As Boolean
> Dim oOutlookApp As Outlook.Application
> Dim oItem As Outlook.MailItem
>
> On Error Resume Next
>
> 'Get Outlook if it's running
> Set oOutlookApp = GetObject(, "Outlook.Application")
>
> 'Outlook wasn't running, start it from code
> If Err <> 0 Then
> Set oOutlookApp = CreateObject("Outlook.Application")
> bStarted = True
> End If
>
> 'Create a new mailitem
> Set oItem = oOutlookApp.CreateItem(olMailItem)
> With oItem
>
> .to = "janine@docsliveonline.com.com"
> .Subject = InputBox("Subject?")
> Selection.Copy
> .GetInspector.WordEditor.Range.Paste
> ' .Body = Selection
> .Display
> End With
>
>
> 'Clean up
> Set oItem = Nothing
> Set oOutlookApp = Nothing
> End Sub
>
>
> "Graham Mayor" <gmayor@REMOVETHISmvps.org> wrote in message
> news:%23$6xbbtoIHA.4904@TK2MSFTNGP03.phx.gbl...
> I did play with Options Mail Format to HTML and Rich Text.
>
>
> Sub Send_Extract_As_MailKeepFmt()
> ' send the document in an Outlook Email message - HTML Rich Text
> Format maintained (Brilliant)
> ' 20April2008
> ' 2007 Graham Mayor Tony Jollans Doug Robbins
>
> Dim bStarted As Boolean
> Dim oOutlookApp As Outlook.Application
> Dim oItem As Outlook.MailItem
>
> On Error Resume Next
>
> 'Get Outlook if it's running
> Set oOutlookApp = GetObject(, "Outlook.Application")
>
> 'Outlook wasn't running, start it from code
> If Err <> 0 Then
> Set oOutlookApp = CreateObject("Outlook.Application")
> bStarted = True
> End If
>
> 'Create a new mailitem
> Set oItem = oOutlookApp.CreateItem(olMailItem)
> With oItem
>
> .to = "janine@docsliveonline.com.com"
> .Subject = InputBox("Subject?")
> Selection.Copy
> .GetInspector.WordEditor.Range.Paste
> ' .Body = Selection
> .Display
> End With
>
>
> 'Clean up
> Set oItem = Nothing
> Set oOutlookApp = Nothing
> End Sub
>
>
> "Graham Mayor" <gmayor@REMOVETHISmvps.org> wrote in message
> news:%23$6xbbtoIHA.4904@TK2MSFTNGP03.phx.gbl...
>> That'll teach me to not to be so fast in pressing the send button :(
>>
>> There appears to be something I am missing?
>> The modifications do not paste the text into the message here?
>>
>> --
>> <>>< ><<> ><<> <>>< ><<> <>>< <>><<>
>> Graham Mayor - Word MVP
>>
>> My web site www.gmayor.com
>> Word MVP web site http://word.mvps.org
>> <>>< ><<> ><<> <>>< ><<> <>>< <>><<>
>>
>>
>> Graham Mayor wrote:
>>
>> There appears to be something I am missing?
>> The modifications do not paste the text into the message here?
>>
>> --
>> <>>< ><<> ><<> <>>< ><<> <>>< <>><<>
>> Graham Mayor - Word MVP
>>
>> My web site www.gmayor.com
>> Word MVP web site http://word.mvps.org
>> <>>< ><<> ><<> <>>< ><<> <>>< <>><<>
>>
>>
>> Graham Mayor wrote:
>>> Brilliant - thanks ;)
>>>
>>>
>>> Tony Jollans wrote:
>>>
>>>
>>> Tony Jollans wrote:
>>>> There ought to be a way to use HTMLBody but it isn't entirely
>>>> straightforward.
>>>>
>>>> What you can do is address the Word editor in Outlook 2007 and
>>>> paste the selection in. The downside to this is that the OMG gives
>>>> you a popup but that probably isn't a big issue in a personal
>>>> environment. Instead of:
>>>>
>>>> .Body = Selection
>>>>
>>>> Try:
>>>>
>>>> Selection.Copy
>>>> .GetInspector.WordEditor.Range.Paste
>>>>
>>>>
>>>> "Graham Mayor" <gmayor@REMOVETHISmvps.org> wrote in message
>>>> news:OspGL9roIHA.552@TK2MSFTNGP06.phx.gbl...
>>>> straightforward.
>>>>
>>>> What you can do is address the Word editor in Outlook 2007 and
>>>> paste the selection in. The downside to this is that the OMG gives
>>>> you a popup but that probably isn't a big issue in a personal
>>>> environment. Instead of:
>>>>
>>>> .Body = Selection
>>>>
>>>> Try:
>>>>
>>>> Selection.Copy
>>>> .GetInspector.WordEditor.Range.Paste
>>>>
>>>>
>>>> "Graham Mayor" <gmayor@REMOVETHISmvps.org> wrote in message
>>>> news:OspGL9roIHA.552@TK2MSFTNGP06.phx.gbl...
>>>>> I had already tried that :(
>>>>>
>>>>> The formatting is lost between Word and Outlook and there doesn't
>>>>> seem to be a way to actually paste into the text area of the
>>>>> Outlook message window using the macro that I have found ... yet
>>>>> ;) --
>>>>> <>>< ><<> ><<> <>>< ><<> <>>< <>><<>
>>>>> Graham Mayor - Word MVP
>>>>>
>>>>> My web site www.gmayor.com
>>>>> Word MVP web site http://word.mvps.org
>>>>> <>>< ><<> ><<> <>>< ><<> <>>< <>><<>
>>>>> .
>>>>>
>>>>> Doug Robbins - Word MVP wrote:
>>>>>
>>>>> The formatting is lost between Word and Outlook and there doesn't
>>>>> seem to be a way to actually paste into the text area of the
>>>>> Outlook message window using the macro that I have found ... yet
>>>>> ;) --
>>>>> <>>< ><<> ><<> <>>< ><<> <>>< <>><<>
>>>>> Graham Mayor - Word MVP
>>>>>
>>>>> My web site www.gmayor.com
>>>>> Word MVP web site http://word.mvps.org
>>>>> <>>< ><<> ><<> <>>< ><<> <>>< <>><<>
>>>>> .
>>>>>
>>>>> Doug Robbins - Word MVP wrote:
>>>>>> Try
>>>>>>
>>>>>> .Body = Selection.FormattedText
>>>>>>
>>>>>>
>>>>>> "Graham Mayor" <gmayor@REMOVETHISmvps.org> wrote in message
>>>>>> news:%233fBmProIHA.4616@TK2MSFTNGP05.phx.gbl...
>>>>>>
>>>>>> .Body = Selection.FormattedText
>>>>>>
>>>>>>
>>>>>> "Graham Mayor" <gmayor@REMOVETHISmvps.org> wrote in message
>>>>>> news:%233fBmProIHA.4616@TK2MSFTNGP05.phx.gbl...
>>>>>>> I can't think of a way to pass the formatting between the
>>>>>>> applications using this macro construction. Until someone comes
>>>>>>> up with something better, change the line.
>>>>>>>
>>>>>>> .Body = Selection
>>>>>>> to
>>>>>>> .Body = ""
>>>>>>>
>>>>>>> and paste your formatted selection into the text area.
>>>>>>>
>>>>>>> To cast the net wider I have cross-posted to the programming and
>>>>>>> Outlook forums
>>>>>>>
>>>>>>> Sub Send_Extract_As_Mail()
>>>>>>> ' send the document in an Outlook Email message
>>>>>>> Dim bStarted As Boolean
>>>>>>> Dim oOutlookApp As Outlook.Application
>>>>>>> Dim oItem As Outlook.MailItem
>>>>>>>
>>>>>>> On Error Resume Next
>>>>>>>
>>>>>>> 'Get Outlook if it's running
>>>>>>> Set oOutlookApp = GetObject(, "Outlook.Application")
>>>>>>>
>>>>>>> 'Outlook wasn't running, start it from code
>>>>>>> If Err <> 0 Then
>>>>>>> Set oOutlookApp = CreateObject("Outlook.Application")
>>>>>>> bStarted = True
>>>>>>> End If
>>>>>>>
>>>>>>> 'Create a new mailitem
>>>>>>> Set oItem = oOutlookApp.CreateItem(olMailItem)
>>>>>>> With oItem
>>>>>>> .to = "someone@somewhere.com"
>>>>>>> .Subject = InputBox("Subject?")
>>>>>>> .Body = Selection
>>>>>>> .Display
>>>>>>> End With
>>>>>>> 'Clean up
>>>>>>> Set oItem = Nothing
>>>>>>> Set oOutlookApp = Nothing
>>>>>>> End Sub
>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>> <>>< ><<> ><<> <>>< ><<> <>>< <>><<>
>>>>>>> Graham Mayor - Word MVP
>>>>>>>
>>>>>>> My web site www.gmayor.com
>>>>>>> Word MVP web site http://word.mvps.org
>>>>>>> <>>< ><<> ><<> <>>< ><<> <>>< <>><<>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> George Lutz wrote:
>>>>>>> applications using this macro construction. Until someone comes
>>>>>>> up with something better, change the line.
>>>>>>>
>>>>>>> .Body = Selection
>>>>>>> to
>>>>>>> .Body = ""
>>>>>>>
>>>>>>> and paste your formatted selection into the text area.
>>>>>>>
>>>>>>> To cast the net wider I have cross-posted to the programming and
>>>>>>> Outlook forums
>>>>>>>
>>>>>>> Sub Send_Extract_As_Mail()
>>>>>>> ' send the document in an Outlook Email message
>>>>>>> Dim bStarted As Boolean
>>>>>>> Dim oOutlookApp As Outlook.Application
>>>>>>> Dim oItem As Outlook.MailItem
>>>>>>>
>>>>>>> On Error Resume Next
>>>>>>>
>>>>>>> 'Get Outlook if it's running
>>>>>>> Set oOutlookApp = GetObject(, "Outlook.Application")
>>>>>>>
>>>>>>> 'Outlook wasn't running, start it from code
>>>>>>> If Err <> 0 Then
>>>>>>> Set oOutlookApp = CreateObject("Outlook.Application")
>>>>>>> bStarted = True
>>>>>>> End If
>>>>>>>
>>>>>>> 'Create a new mailitem
>>>>>>> Set oItem = oOutlookApp.CreateItem(olMailItem)
>>>>>>> With oItem
>>>>>>> .to = "someone@somewhere.com"
>>>>>>> .Subject = InputBox("Subject?")
>>>>>>> .Body = Selection
>>>>>>> .Display
>>>>>>> End With
>>>>>>> 'Clean up
>>>>>>> Set oItem = Nothing
>>>>>>> Set oOutlookApp = Nothing
>>>>>>> End Sub
>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>> <>>< ><<> ><<> <>>< ><<> <>>< <>><<>
>>>>>>> Graham Mayor - Word MVP
>>>>>>>
>>>>>>> My web site www.gmayor.com
>>>>>>> Word MVP web site http://word.mvps.org
>>>>>>> <>>< ><<> ><<> <>>< ><<> <>>< <>><<>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> George Lutz wrote:
>>>>>>>> Terry:
>>>>>>>>
>>>>>>>> Thanks, but that had no effect on the result.
>>>>>>>>
>>>>>>>> George Lutz
>>>>>>>>
>>>>>>>> "Terry Farrell" wrote:
>>>>>>>>
>>>>>>>>
>>>>>>>> Thanks, but that had no effect on the result.
>>>>>>>>
>>>>>>>> George Lutz
>>>>>>>>
>>>>>>>> "Terry Farrell" wrote:
>>>>>>>>
>>>>>>>>> In Outlook, go to Tools, Options, select the Mail Format tab
>>>>>>>>> and then click on Editor Options at the bottom.
>>>>>>>>>
>>>>>>>>> Select the Advanced tab and then under Cut, Copy Paste
>>>>>>>>> section, make sure that the Keep Source formatting option is
>>>>>>>>> selected. that should then paste and keep your formatting
>>>>>>>>> without need to modify the macro. Terry
>>>>>>>>>
>>>>>>>>> "George Lutz" <GeorgeLutz@discussions.microsoft.com> wrote in
>>>>>>>>> message
>>>>>>>>> news:AFA46BFE-E95A-4281-92A2-12CEC503C434@microsoft.com...
>>>>>>>>> and then click on Editor Options at the bottom.
>>>>>>>>>
>>>>>>>>> Select the Advanced tab and then under Cut, Copy Paste
>>>>>>>>> section, make sure that the Keep Source formatting option is
>>>>>>>>> selected. that should then paste and keep your formatting
>>>>>>>>> without need to modify the macro. Terry
>>>>>>>>>
>>>>>>>>> "George Lutz" <GeorgeLutz@discussions.microsoft.com> wrote in
>>>>>>>>> message
>>>>>>>>> news:AFA46BFE-E95A-4281-92A2-12CEC503C434@microsoft.com...
>>>>>>>>>> Terry -- thanks, I found it.
>>>>>>>>>>
>>>>>>>>>> Graham: Can your macro be modifed so that the text that is
>>>>>>>>>> pasted into the email body preserves the formatting it had in
>>>>>>>>>> Word? When I run your macro,
>>>>>>>>>> bolded text becomes unbolded and tabs disappear.
>>>>>>>>>>
>>>>>>>>>> Thanks.
>>>>>>>>>>
>>>>>>>>>> George Lutz
>>>>>>>>>>
>>>>>>>>>> "Terry Farrell" wrote:
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Graham: Can your macro be modifed so that the text that is
>>>>>>>>>> pasted into the email body preserves the formatting it had in
>>>>>>>>>> Word? When I run your macro,
>>>>>>>>>> bolded text becomes unbolded and tabs disappear.
>>>>>>>>>>
>>>>>>>>>> Thanks.
>>>>>>>>>>
>>>>>>>>>> George Lutz
>>>>>>>>>>
>>>>>>>>>> "Terry Farrell" wrote:
>>>>>>>>>>
>>>>>>>>>>> Right-click anywhere on the QAT and select Customize. In the
>>>>>>>>>>> customize dialog, select All Commands and scroll down to
>>>>>>>>>>> Microsoft Outlook.
>>>>>>>>>>>
>>>>>>>>>>> But I am assuming that you have the whole Office 2007 suit
>>>>>>>>>>> and not just Word
>>>>>>>>>>> 2007 mixed with Outlook 2003. That combination won't work as
>>>>>>>>>>> Word 2007 needs
>>>>>>>>>>> Outlook 2007 for compatibility.
>>>>>>>>>>>
>>>>>>>>>>> Hope this sorts it for you.
>>>>>>>>>>>
>>>>>>>>>>> Terry
>>>>>>>>>>>
>>>>>>>>>>> "George Lutz" <GeorgeLutz@discussions.microsoft.com> wrote
>>>>>>>>>>> in message
>>>>>>>>>>> news:75250428-033E-45B7-B7D8-08211F879919@microsoft.com...
>>>>>>>>>>> customize dialog, select All Commands and scroll down to
>>>>>>>>>>> Microsoft Outlook.
>>>>>>>>>>>
>>>>>>>>>>> But I am assuming that you have the whole Office 2007 suit
>>>>>>>>>>> and not just Word
>>>>>>>>>>> 2007 mixed with Outlook 2003. That combination won't work as
>>>>>>>>>>> Word 2007 needs
>>>>>>>>>>> Outlook 2007 for compatibility.
>>>>>>>>>>>
>>>>>>>>>>> Hope this sorts it for you.
>>>>>>>>>>>
>>>>>>>>>>> Terry
>>>>>>>>>>>
>>>>>>>>>>> "George Lutz" <GeorgeLutz@discussions.microsoft.com> wrote
>>>>>>>>>>> in message
>>>>>>>>>>> news:75250428-033E-45B7-B7D8-08211F879919@microsoft.com...
>>>>>>>>>>>> Graham's macro works very nicely -- thank you, Graham.
>>>>>>>>>>>>
>>>>>>>>>>>> Terry: I would like to try your suggestion, but Outlook
>>>>>>>>>>>> does not seem to
>>>>>>>>>>>> be
>>>>>>>>>>>> a Command available to me in Word Options | Customize | All
>>>>>>>>>>>> Commands. Where
>>>>>>>>>>>> can I find the Command to which you are referring?
>>>>>>>>>>>>
>>>>>>>>>>>> Thanks.
>>>>>>>>>>>>
>>>>>>>>>>>> George Lutz
>>>>>>>>>>>>
>>>>>>>>>>>> "Terry Farrell" wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> Terry: I would like to try your suggestion, but Outlook
>>>>>>>>>>>> does not seem to
>>>>>>>>>>>> be
>>>>>>>>>>>> a Command available to me in Word Options | Customize | All
>>>>>>>>>>>> Commands. Where
>>>>>>>>>>>> can I find the Command to which you are referring?
>>>>>>>>>>>>
>>>>>>>>>>>> Thanks.
>>>>>>>>>>>>
>>>>>>>>>>>> George Lutz
>>>>>>>>>>>>
>>>>>>>>>>>> "Terry Farrell" wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>> George
>>>>>>>>>>>>>
>>>>>>>>>>>>> You can add the Outlook command button to the QAT, just
>>>>>>>>>>>>> like you can add
>>>>>>>>>>>>> the
>>>>>>>>>>>>> Send to Mail Recipient tool to the QAT.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Terry Farrell
>>>>>>>>>>>>>
>>>>>>>>>>>>> "George Lutz" <GeorgeLutz@discussions.microsoft.com> wrote
>>>>>>>>>>>>> in message
>>>>>>>>>>>>> news:5F4E7F9A-7155-40CA-9AAF-2B3C73B291A3@microsoft.com...
>>>>>>>>>>>>>
>>>>>>>>>>>>> You can add the Outlook command button to the QAT, just
>>>>>>>>>>>>> like you can add
>>>>>>>>>>>>> the
>>>>>>>>>>>>> Send to Mail Recipient tool to the QAT.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Terry Farrell
>>>>>>>>>>>>>
>>>>>>>>>>>>> "George Lutz" <GeorgeLutz@discussions.microsoft.com> wrote
>>>>>>>>>>>>> in message
>>>>>>>>>>>>> news:5F4E7F9A-7155-40CA-9AAF-2B3C73B291A3@microsoft.com...
>>>>>>>>>>>>>> But I don't want to send the entire Word document -- just
>>>>>>>>>>>>>> the portion
>>>>>>>>>>>>>> of
>>>>>>>>>>>>>> it
>>>>>>>>>>>>>> that is my email. I take notes as I go through the day,
>>>>>>>>>>>>>> and occasionally
>>>>>>>>>>>>>> compose an email that I then want to send. The email is
>>>>>>>>>>>>>> just a small
>>>>>>>>>>>>>> portion
>>>>>>>>>>>>>> of the day's notes. So, I compose the email, then cut
>>>>>>>>>>>>>> and paste its text
>>>>>>>>>>>>>> into Outlook. The button I used in Word 2003 called up
>>>>>>>>>>>>>> Outlook, opened
>>>>>>>>>>>>>> a
>>>>>>>>>>>>>> blank email, and allowed me to paste in the text I had
>>>>>>>>>>>>>> prepared in Word.
>>>>>>>>>>>>>> I
>>>>>>>>>>>>>> also had a button that called up Outlook with an email
>>>>>>>>>>>>>> already addressed
>>>>>>>>>>>>>> to
>>>>>>>>>>>>>> my assistant, who is the recipient of about half of the
>>>>>>>>>>>>>> 20 or so emails
>>>>>>>>>>>>>> I
>>>>>>>>>>>>>> send each day -- very convenient. Amazing that such a
>>>>>>>>>>>>>> useful feature
>>>>>>>>>>>>>> would
>>>>>>>>>>>>>> be eliminated in an "updated" version of Word!
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> I appreciate your replies. however.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> George Lutz
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> "Terry Farrell" wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> the portion
>>>>>>>>>>>>>> of
>>>>>>>>>>>>>> it
>>>>>>>>>>>>>> that is my email. I take notes as I go through the day,
>>>>>>>>>>>>>> and occasionally
>>>>>>>>>>>>>> compose an email that I then want to send. The email is
>>>>>>>>>>>>>> just a small
>>>>>>>>>>>>>> portion
>>>>>>>>>>>>>> of the day's notes. So, I compose the email, then cut
>>>>>>>>>>>>>> and paste its text
>>>>>>>>>>>>>> into Outlook. The button I used in Word 2003 called up
>>>>>>>>>>>>>> Outlook, opened
>>>>>>>>>>>>>> a
>>>>>>>>>>>>>> blank email, and allowed me to paste in the text I had
>>>>>>>>>>>>>> prepared in Word.
>>>>>>>>>>>>>> I
>>>>>>>>>>>>>> also had a button that called up Outlook with an email
>>>>>>>>>>>>>> already addressed
>>>>>>>>>>>>>> to
>>>>>>>>>>>>>> my assistant, who is the recipient of about half of the
>>>>>>>>>>>>>> 20 or so emails
>>>>>>>>>>>>>> I
>>>>>>>>>>>>>> send each day -- very convenient. Amazing that such a
>>>>>>>>>>>>>> useful feature
>>>>>>>>>>>>>> would
>>>>>>>>>>>>>> be eliminated in an "updated" version of Word!
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> I appreciate your replies. however.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> George Lutz
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> "Terry Farrell" wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> It was never necessary to copy and paste into a blank
>>>>>>>>>>>>>>> email in Outlook.
>>>>>>>>>>>>>>> All
>>>>>>>>>>>>>>> you ever needed to do from Word was to click on the Send
>>>>>>>>>>>>>>> to Mail Recipient
>>>>>>>>>>>>>>> tool (in either Word 2002, Word 2003 or Word 2007).
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> When you click on that tool, it adds the standard email
>>>>>>>>>>>>>>> address bar to
>>>>>>>>>>>>>>> the
>>>>>>>>>>>>>>> top of the windows which looks and feels identical to
>>>>>>>>>>>>>>> the blank email
>>>>>>>>>>>>>>> in
>>>>>>>>>>>>>>> Outlook.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> In Word 2007, you need to add this command button Send
>>>>>>>>>>>>>>> Mail to Recipient
>>>>>>>>>>>>>>> to
>>>>>>>>>>>>>>> the QAT because Microsoft inexplicably left it off the
>>>>>>>>>>>>>>> Send Menu.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>> Terry Farrell - MSWord MVP
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> "George Lutz" <George Lutz@discussions.microsoft.com>
>>>>>>>>>>>>>>> wrote in message
>>>>>>>>>>>>>>> news:9BB76EF2-D598-444C-9B26-B33575E4F950@microsoft.com...
>>>>>>>>>>>>>>> email in Outlook.
>>>>>>>>>>>>>>> All
>>>>>>>>>>>>>>> you ever needed to do from Word was to click on the Send
>>>>>>>>>>>>>>> to Mail Recipient
>>>>>>>>>>>>>>> tool (in either Word 2002, Word 2003 or Word 2007).
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> When you click on that tool, it adds the standard email
>>>>>>>>>>>>>>> address bar to
>>>>>>>>>>>>>>> the
>>>>>>>>>>>>>>> top of the windows which looks and feels identical to
>>>>>>>>>>>>>>> the blank email
>>>>>>>>>>>>>>> in
>>>>>>>>>>>>>>> Outlook.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> In Word 2007, you need to add this command button Send
>>>>>>>>>>>>>>> Mail to Recipient
>>>>>>>>>>>>>>> to
>>>>>>>>>>>>>>> the QAT because Microsoft inexplicably left it off the
>>>>>>>>>>>>>>> Send Menu.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>> Terry Farrell - MSWord MVP
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> "George Lutz" <George Lutz@discussions.microsoft.com>
>>>>>>>>>>>>>>> wrote in message
>>>>>>>>>>>>>>> news:9BB76EF2-D598-444C-9B26-B33575E4F950@microsoft.com...
>>>>>>>>>>>>>>>> I just chagned from Word 2003 to Word 2007. In Word
>>>>>>>>>>>>>>>> 2003, I had an
>>>>>>>>>>>>>>>> icon
>>>>>>>>>>>>>>>> in
>>>>>>>>>>>>>>>> the toolbar that allowed me to call upOutlook. I.e., I
>>>>>>>>>>>>>>>> wouudl compose
>>>>>>>>>>>>>>>> and
>>>>>>>>>>>>>>>> email in word, then select and copy it, then click on
>>>>>>>>>>>>>>>> this icno, and
>>>>>>>>>>>>>>>> an
>>>>>>>>>>>>>>>> email
>>>>>>>>>>>>>>>> opened up ready for me to paste in the text. I am
>>>>>>>>>>>>>>>> pretty sure I used
>>>>>>>>>>>>>>>> the
>>>>>>>>>>>>>>>> Customixe feature in 2002 to do this.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> How can I get such an icon in 2007 to land in my Quick
>>>>>>>>>>>>>>>> Access Toolbar?
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Thanks.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> George Lutz
>>>>>>>>>>>>>>>> 2003, I had an
>>>>>>>>>>>>>>>> icon
>>>>>>>>>>>>>>>> in
>>>>>>>>>>>>>>>> the toolbar that allowed me to call upOutlook. I.e., I
>>>>>>>>>>>>>>>> wouudl compose
>>>>>>>>>>>>>>>> and
>>>>>>>>>>>>>>>> email in word, then select and copy it, then click on
>>>>>>>>>>>>>>>> this icno, and
>>>>>>>>>>>>>>>> an
>>>>>>>>>>>>>>>> opened up ready for me to paste in the text. I am
>>>>>>>>>>>>>>>> pretty sure I used
>>>>>>>>>>>>>>>> the
>>>>>>>>>>>>>>>> Customixe feature in 2002 to do this.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> How can I get such an icon in 2007 to land in my Quick
>>>>>>>>>>>>>>>> Access Toolbar?
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Thanks.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> George Lutz
All times are in (US) Eastern Daylight Time (GMT -4:00)