|
Here's a good description of the problem and a solution - a .NET update is
the culprit!
http://support.quickbooks.intuit.com/support/pages/knowledgebasearticle/1009275
HTH,
Lon
___________________________________________________________
Lon Orenstein
pinpointtools, llc
Lon@pinpointtools.com
Author of Outlook 2007 Business Contact Manager For Dummies
Author of the eBook: Moving from ACT! to Business Contact Manager
www.pinpointtools.com
"JakesDad" <JakesDad@discussions.microsoft.com> wrote in message
news:51CEA9B6-8303-4642-916E-1E4CE624FF94@microsoft.com...
the culprit!
http://support.quickbooks.intuit.com/support/pages/knowledgebasearticle/1009275
HTH,
Lon
___________________________________________________________
Lon Orenstein
pinpointtools, llc
Lon@pinpointtools.com
Author of Outlook 2007 Business Contact Manager For Dummies
Author of the eBook: Moving from ACT! to Business Contact Manager
www.pinpointtools.com
"JakesDad" <JakesDad@discussions.microsoft.com> wrote in message
news:51CEA9B6-8303-4642-916E-1E4CE624FF94@microsoft.com...
> Cannot start Quick Books either
>
> "Most compatible GPS handheld w/S&T" wrote:
>
>
> "Most compatible GPS handheld w/S&T" wrote:
>
>> Is TurboTax 2007 from the makers of CA Internet Security.
>> Do you use CA Internet Security?
>> I updated my CA Internet Security recently and I'm having the same
>> problem
>> that everyone else is having, so I'm wondering if there is a conflict
>> between
>> CA and Business Contact Manager.
>>
>> Thanks in advance for a reply,
>>
>> Paul
>>
>> "Stuart Dole" wrote:
>>
>> Do you use CA Internet Security?
>> I updated my CA Internet Security recently and I'm having the same
>> problem
>> that everyone else is having, so I'm wondering if there is a conflict
>> between
>> CA and Business Contact Manager.
>>
>> Thanks in advance for a reply,
>>
>> Paul
>>
>> "Stuart Dole" wrote:
>>
>> > Hi Vinit:
>> >
>> > The problem turned out to be even worse than BCM. The microsoft update
>> > log
>> > showed that an update for .NET failed to install on the evening of the
>> > 11th.
>> > I traced the error message number back and got that "something's wrong"
>> > and
>> > to uninstall ALL .NET components and reinstall. Well, none (NONE) of
>> > the .NET
>> > components would uninstall manually on the "Install and Remove
>> > Software" tool
>> > in the control panel. The description for the error said if that
>> > happened to
>> > use the .NET uninstall tool, which I did (took forever!). Then Outlook
>> > was
>> > hosed, naturally. I tried to install each of the .NET compnents
>> > (starting
>> > from 1.0, then service pack 3 for 1.0, etc.), and it got all squirlly
>> > and I
>> > quit for the night, distressed that Turbotax won't run either and I
>> > haven't
>> > filed yet.
>> >
>> > Why is it that software and computers KNOW when things are critical and
>> > fail
>> > just then, of all times?
>> >
>> > Today I reinstalled Turbotax 2007 (which seems to force an install of
>> > .NET
>> > 2.0) and miracle! Outlook runs! No error boxes! I have NOT tried to do
>> > the
>> > updates on .NET again -- will hold off until after I've filed my taxes.
>> >
>> > I don't know if this helps. Maybe the others should check their
>> > Microsoft
>> > Update log and see if there's a .NET problem. And if so, to be very
>> > careful
>> > about what you do about it!
>> >
>> > Happy trails,
>> > Stuart
>> >
>> >
>> > "jainvinit@gmail.com" wrote:
>> >
>> >
>> > The problem turned out to be even worse than BCM. The microsoft update
>> > log
>> > showed that an update for .NET failed to install on the evening of the
>> > 11th.
>> > I traced the error message number back and got that "something's wrong"
>> > and
>> > to uninstall ALL .NET components and reinstall. Well, none (NONE) of
>> > the .NET
>> > components would uninstall manually on the "Install and Remove
>> > Software" tool
>> > in the control panel. The description for the error said if that
>> > happened to
>> > use the .NET uninstall tool, which I did (took forever!). Then Outlook
>> > was
>> > hosed, naturally. I tried to install each of the .NET compnents
>> > (starting
>> > from 1.0, then service pack 3 for 1.0, etc.), and it got all squirlly
>> > and I
>> > quit for the night, distressed that Turbotax won't run either and I
>> > haven't
>> > filed yet.
>> >
>> > Why is it that software and computers KNOW when things are critical and
>> > fail
>> > just then, of all times?
>> >
>> > Today I reinstalled Turbotax 2007 (which seems to force an install of
>> > .NET
>> > 2.0) and miracle! Outlook runs! No error boxes! I have NOT tried to do
>> > the
>> > updates on .NET again -- will hold off until after I've filed my taxes.
>> >
>> > I don't know if this helps. Maybe the others should check their
>> > Microsoft
>> > Update log and see if there's a .NET problem. And if so, to be very
>> > careful
>> > about what you do about it!
>> >
>> > Happy trails,
>> > Stuart
>> >
>> >
>> > "jainvinit@gmail.com" wrote:
>> >
>> > > On Apr 12, 5:41 pm, Stuart Dole
>> > > <StuartD...@discussions.microsoft.com>
>> > > wrote:
>> > > hi
>> > > Could you provide us with some repro steps? We need more information
>> > > to analyze this problem. Can you please enable logging for BCM and
>> > > send the log file to BCMISVX__at__microsoft.com . Please note that
>> > > there are no underscores in the above e-mail address . Please follow
>> > > the following steps to enable logging for BCM.
>> > >
>> > > 1. Go to the help menu
>> > > 2. Choose About Business Contact Manager for Outlook
>> > > 3. Another window opens up and in the bottom of that , there will be
>> > > a
>> > > checkbox to enable logging for BCM , Please check that.
>> > > 4. Redo the conversion
>> > > 5. You can find the log file at C:\Users\"your user
>> > > name"\AppData\Local
>> > > \Temp\BCMLog_V3.log
>> > >
>> > > Thanks
>> > > Vinit
>> > >
>> > >
>> > > <StuartD...@discussions.microsoft.com>
>> > > wrote:
>> > > > I'm seeing it too, since last night's update -- I don't even use
>> > > > BCM, though
>> > > > it's installed. Outlook is difficult to use around all the popups.
>> > > > Anyone
>> > > > tried to just roll back their system?
>> > > >
>> > > >
>> > > >
>> > > > "tamara" wrote:
>> > > > - Show quoted text -
>> > >>> > > > BCM, though
>> > > > it's installed. Outlook is difficult to use around all the popups.
>> > > > Anyone
>> > > > tried to just roll back their system?
>> > > >
>> > > >
>> > > >
>> > > > "tamara" wrote:
>> > > > > Business contact manager failed to initialize the common language
>> > > > > runtime
>> > > > > Ecall methods must be packaged into a system module
>> > > >>> > > > > runtime
>> > > > > Ecall methods must be packaged into a system module
>> > > > > What is this error? How do I correct it? This just started
>> > > > > happening this
>> > > > > morning.- Hide quoted text -
>> > > >>> > > > > happening this
>> > > > > morning.- Hide quoted text -
>> > > > - Show quoted text -
>> > > hi
>> > > Could you provide us with some repro steps? We need more information
>> > > to analyze this problem. Can you please enable logging for BCM and
>> > > send the log file to BCMISVX__at__microsoft.com . Please note that
>> > > there are no underscores in the above e-mail address . Please follow
>> > > the following steps to enable logging for BCM.
>> > >
>> > > 1. Go to the help menu
>> > > 2. Choose About Business Contact Manager for Outlook
>> > > 3. Another window opens up and in the bottom of that , there will be
>> > > a
>> > > checkbox to enable logging for BCM , Please check that.
>> > > 4. Redo the conversion
>> > > 5. You can find the log file at C:\Users\"your user
>> > > name"\AppData\Local
>> > > \Temp\BCMLog_V3.log
>> > >
>> > > Thanks
>> > > Vinit
>> > >
>> > >
| 12 Apr 2008 | BCM failed to initialize the common language runtime Ecall methods | .tamara |
| 12 Apr 2008 |  RE: BCM failed to initialize the common language runtime Ecall methods | .JakesDad |
| 14 Apr 2008 |   RE: BCM failed to initialize the common language runtime Ecall met | .Most compatible GPS h... |
| 12 Apr 2008 | RE: BCM failed to initialize the common language runtime Ecall methods | .Stuart Dole |
Contact Us
All times are in (US) Eastern Daylight Time (GMT -4:00)
All times are in (US) Eastern Daylight Time (GMT -4:00)